시험인증

HOME시험인증시험인증기관현황

시험인증기관현황

기관명 : (주)한국안전인증
  • 주소 기도 용인시 처인구 남사면 처인성로 1106
  • 인증번호 KT743
  • 품질책임자 문대식
  • 대표자명
  • 전화번호 031-323-4905
  • 팩스번호 31-328-4905
  • 유효기간 2021-04-02
  • 이메일
  • 인정분야 전기시험
규격번호규격명비고

▶ 산업용 전기기기

KS C IEC 60079-0:2007방폭기기-제0부:일반요구사항
<제외항목>
-26.5.3 소형부품 점화시험
-26.10 내광시험
-26.11 내화학성
-26.14 충전시험
온도:(0~480) ℃
충격:1 kg 추(0.1~2) m
Torque: Max. 340 N·m
온도,습도범위:(-70~300) ℃, (0~90 ± 5) % R.H.
표면저항: (0.25~0.5) TΩ
질량: 0.1 mg~252 g, 100 g~200 kg
충격 : 1 kg 추 0.1 m~2 m
Torque : Max. 340 Nm
항온항습기 : (-70~+300) ℃, (0~90±5) % R.H.
표면저항 : 0.25 ㏁~0.5 TΩ
KS C IEC 60079-1:2012폭발성 분위기 - 제1부: 내압방폭구조"d“
<제외항목>
-10.9.2 통기 및 배수 장치의 형식시험
-15.4.2 열시험
-19.3.2 난연성
-부속서B 통기장치
기준압: Max. 6894 kPa
수압: Max. 6894 kPa
KS C IEC 60079-2:2012폭발성 분위기 - 제2부: 압력방폭구조"P"유량 1000 ℓ/min 이하
산소 농도 : 0~100 %
KS C IEC 60079-5:2012폭발성 분위기 - 제5부: 충전방폭구조
<제외항목>
-5.1.4 충전재의 절연 내력 시험
내전압 : 1000 V, 0.25 ㏁~0.5 TΩ
압력 : Max. 1.5 MPa
KS C IEC 60079-6:2007방폭 기기 - 제6부 유입 방폭구조압력 : 600 kPa 이하
KS C IEC 60079-7:2012폭발성분위기-제7부:안전증방폭구조"e"
<제외항목>
-6.3.2.3 음극선 램프의 전력소비
-6.3.3 이산화항 시험
-6.3.4 진동시험
내전압: Max. 6 kV
Force: (5~15) N
Torque: (0.3~3) N·m
절연저항: 1 ㏁이상
Pull force: 50 N이하
KS C IEC 60079-11:2007방폭기기-제11부:본질안전방폭구조"i“
<제외항목>
-10.7 소형 부품의 점화시험
-10.12 안전분로기의 형식 시험
Gas-Air range:(8.3 ± 0.3) % Methane, (5.25 ± 0.25) % Propane, (7.8 ± 0.5) % ethylene, (21~60 ± 2) % Hydrogen
Force: 30 N
Pull test: (30~50) N
내전압: Max. 6 kV
KS C IEC 60079-15:2007방폭 기기 제15부 비점화 방폭구조"n"내전압: Max. 6 kV
온도,습도범위:(-70~300) ℃, (0~90 ± 5) % R.H.
압력: 1620 kPa이하
Pull test: (1~200) N
질량: 0.1 mg~252 g
KS C IEC 60079-18:2007방폭 기기 제18부 몰드 방폭구조"m"내전압: Max. 6 kV
온도,습도범위:(-70~300) ℃, (0~90 ± 5) % R.H.
압력: 1620 kPa이하
Pull test: (1~200) N
질량: 0.1 mg~252 g
KS C IEC 60079-28:2012폭발분위기―제28부:광학방사용장비및전송시스템의보호
<제외항목>
-6.3 시험혼합물
-6.4 펄스열
Energy : 20 μJ ~ 2 J, Power : 10 μW ~ 3 W
KS C IEC 60079-31:2012폭발성 분위기 — 제31부: 't"외함으로 보호되는 분진 방폭기기압력 : 2 kPa, 4 kPa
KS C IEC 60529:2006외곽의방진보호및방수보호등급(IP코드)
<제외항목>
-14.2.4 a) 진동관
IP24~IP68
IEC 60079-0:2011Explosiveatmospheres-Part0:Equipment-Generalrequirements
<제외항목>
-25.5.3 Small component ignition test
-26.10 Resistance to light
-26.11 Resistance to chemical agents
-26.15 Verification of ratings of ventilating fans
온도:(0~480) ℃
충격:1 kg 추(0.1~2) m
Torque: Max. 340 N·m
온도,습도범위:(-70~300) ℃, (0~90 ± 5) % R.H.
표면저항: (0.25~0.5) TΩ
질량: 0.1 mg~252 g, 100 g~200 kg
IEC 60079-1:2014Explosiveatmospheres-Part1:Equipmentprotectionbyflameproofenclosures"d"
<제외항목>
-10.9.3 Breathing and draining device
-Annex B breathing and draining devices
기준압 : Max. 6894 kPa
수압: Max. 6894 kPa
IEC 60079-2:2014Explosive atmospheres – Part 2: Equipment protection by pressurized enclosure "p"유량 1000 ℓ/min 이하
산소 농도 : 0~100 %
IEC 60079-5:2015Explosive atmospheres – Part 5: Equipment protection by powder filling “q”
<제외항목>
-5.1.3 Dielectric strength test of the filling material
내전압 : 1000 V, 0.25 ㏁~0.5 TΩ
압력 : Max. 1.5 MPa
IEC 60079-6:2015Explosive atmospheres –Part 6: Equipment protection by liquid immersion "o"압력 : 600 kPa 이하
IEC 60079-7:2015Explosive atmospheres – Part 7: Equipment protection by increased safety ''e'’
<제외항목>
-6.2 Rotating electrical machine
-6.3.4.3 Power dissipation of cathodes
-6.3.5 Sulphur dioxide test
-6.3.6 Vibration test
-6.6.3 Mechanical shock test
-6.6.4 Ventilation of battery
내전압: Max. 6 kV
Force: (5~15) N
Torque: (0.3~3) N·m
절연저항: 1 ㏁이상
Pull force: 50 N이하
IEC 60079-11:2011Explosive atmospheres – Part 11: Equipment protection by intrinsic safety "i“
<제외항목>
-10.8 Safety shunts
Gas-Air range:(8.3 ± 0.3) % Methane, (5.25 ± 0.25) % Propane, (7.8 ± 0.5) % ethylene, (21~60 ± 2) % Hydrogen
Force: 30 N
Pull test: (30~50) N
내전압: Max. 6 kV
BS EN IEC 60529:2013Degrees of protection provided by enclosures(IP Code)
<제외항목>
-14.2.4 a) Oscillating tube
IP24~IP68
IEC 60079-15:2010Explosive atmospheres – Part 15: Equipment protection by type of protection "n“
<제외항목>
-22.11 Mechanical shock test for batteries
-22.13 high voltage machine
-Small component ignition, Resistance to light
온도,습도범위:(-70~300) ℃, (0~90 ± 5) % R.H.
내전압: Max. 6 kV
압력:-0.3 kPa, 0.4 kPa
Torque: (0.3~2.25) N·m
Force: 5 N
IEC 60079-18:2014Explosive atmospheres – Part 18: Equipment protection by encapsulation “m”내전압: Max. 6 kV
온도,습도범위:(-70~300) ℃, (0~90 ± 5) % R.H.
압력: 1620 kPa이하
Pull test: (1~200) N
질량: 0.1 mg~252 g
IEC 60079-28:2015Explosive atmospheres – Part 28: Protection of equipment and transmission systems using optical radiation
<제외항목>
-6.2 Verification of suitability
-6.3 Type tests
Energy : 20 μJ ~ 2 J, Power : 10 μW ~ 3 W
IEC 60079-31:2013Explosive atmospheres- Part 31: Equipment dust ignition protection by enclosure "t"압력 : 2 kPa, 4 kPa
IEC 60529:2013Degrees of protection provided by enclosures(IP Code)
<제외항목>
-14.2.4 a) Oscillating tube
IP24~IP68
BS EN 60079-0:2012Explosive atmospheres. Equipment. General requirements
<제외항목>
-25.5.3 Small component ignition test
-26.10 Resistance to light
-26.11 Resistance to chemical agents
-26.15 Verification of ratings of
온도:(0~480) ℃
충격:1 kg 추(0.1~2) m
Torque: Max. 340 N·m
온도,습도범위:(-70~300) ℃, (0~90 ± 5) % R.H.
표면저항: (0.25~0.5) TΩ
질량: 0.1 mg~252 g, 100 g~200 kg
ventilating fans
BS EN 60079-1:2014Electrical apparatus for explosive gas atmospheres. Flameproof enclosures 'd’<제외항목>
-10.9.3 Breathing and draining device
-Annex B breathing and draining devices
기준압 : Max. 6894 kPa
수압: Max. 6894 kPa
BS EN 60079-2:2014Explosive atmospheres. Equipment protection by powder filling "q“
<제외항목>
-5.1.3 Dielectric strength test of the filling material
내전압:1000 V, (0.25~0.5) TΩ
압력: Max. 1.5 Mpa
BS EN 60079-5:2015Explosive atmospheres. Equipment protection by powder filling "q“
<제외항목>
-5.1.3 Dielectric strength test of the filling material
내전압 : 1000 V, 0.25 ㏁~0.5 TΩ
압력 : Max. 1.5 MPa
BS EN 60079-6:2015Explosive atmospheres. Equipment protection by liquid immersion “o”압력 : 600 kPa 이하
BS EN 60079-7:2015Electrical apparatus for explosive gas atmospheres. Increased safety "e“
<제외항목>
-6.2 Rotating electrical machines
-6.3.4.3 Power dissipation of cathodes
-6.3.5 Sulphur dioxide test
-6.3.6 Vibration test
-6.6.3 Mechanical shock test
-6.6.4 Ventilation of battery
내전압: Max. 6 kV
Force: (5~15) N
Torque: (0.3~3) N·m
절연저항: 1 ㏁이상
Pull force: 50 N이하
BS EN 60079-11:2012Explosive atmospheres. Equipment protection by intrinsic safety "i“
<제외항목>
-10.8 Safety shunts
Gas-Air range:(8.3 ± 0.3) % Methane, (5.25 ± 0.25) % Propane, (7.8 ± 0.5) % ethylene, (21~60 ± 2) % Hydrogen
Force: 30 N
Pull test: (30~50) N
내전압: Max. 6 kV
BS EN 60079-15:2010Electrical apparatus for explosive gas atmospheres. Type of protection "n“
<제외항목>
-22.11 Mechanical shock test for batteries
-22.13 high-voltage machine
Small component ignition, Resistance to light
온도,습도범위:(-70~300) ℃, (0~90 ± 5) % R.H.
내전압: Max. 6 kV
압력:-0.3 kPa, 0.4 kPa
Torque: (0.3~2.25) N·m
Force: 5 N
BS EN 60079-18:2015Explosive atmospheres. Equipment protection by encapsulation "m"내전압: Max. 6 kV
온도,습도범위:(-70~300) ℃, (0~90 ± 5) % R.H.
압력: 1620 kPa이하
Pull test: (1~200) N
질량: 0.1 mg~252 g
BS EN 60079-28:2015Explosive atmospheres. Protection of equipment and transmission systems using optical radiation<제외항목>
-6.2 Verification of suitability
-6.3 Type tests
Energy : 20 μJ ~ 2 J, Power : 10 μW ~ 3 W
BS EN 60079-31:2014Explosive atmospheres. Equipment dust ignition protection by enclosure "t"압력 : 2 kPa, 4 kPa
고용노동부고시
제2013-54호
방호장치의무안전인증고시
<제외항목>
-별표6의2 10호 내광시험
-별표6의2 11호내화학성시험
-별표6의2 14호 정진기 대전시험
-별표7의5 통기배수 장치에 관한 추가요구조건
-별표9의2 2호
-별표11의2 8호 다이오드의 고전류펄스 시험
-별표14의2 4호 절연내력시험
온도: (0~480) ℃
충격:1 kg 추 (0.1~2) m
Torque: Max.340 N·m
온도,습도범위:(-70~300) ℃, (0~90 ± 5) %R.H.
표면저항: (0.25~0.5) TΩ
기준압: Max. 6894 kPa
수압: Max. 6894 kPa
유량 : 1000 L/min이하
산소농도: (0~100) %
내전압: Max. 6 kV
Force: (5~15) N
Torque: (0.3~3) N·m
절연저항: 1 ㏁이상
Pull force: 50 N이하
Gas-Air range:(8.3 ± 0.3) % Methane, (5.25 ± 0.25) % Propane, (7.8 ± 0.5) % ethylene, (21~60 ± 2) % Hydrogen
Force: 30 N
Pull test: (30~50) N
질량: 0.1 mg~252 g, 100 g~200 kg

목록