½ÃÇèÀÎÁõ

HOME½ÃÇèÀÎÁõ½ÃÇèÀÎÁõ±â°üÇöȲ

½ÃÇèÀÎÁõ±â°üÇöȲ

±â°ü¸í : ÁÖ½Äȸ»ç ÀÌ¿£Áö
  • ÁÖ¼Ò °æ±âµµ ±¤Áֽà °ïÁö¾ÏÀ¾ °æÃæ´ë·Î 135-60
  • ÀÎÁõ¹øÈ£ KT733
  • ǰÁúÃ¥ÀÓÀÚ ¹Ú¼ö¿ë
  • ´ëÇ¥ÀÚ¸í
  • ÀüÈ­¹øÈ£ 031-727-8300
  • ÆÑ½º¹øÈ£ 031-764-0800
  • À¯È¿±â°£ 2021-01-30
  • À̸ÞÀÏ
  • ÀÎÁ¤ºÐ¾ß Àü±â½ÃÇè
±Ô°Ý¹øÈ£±Ô°Ý¸íºñ°í

¢º À¯/¹«¼± Åë½Å±â±â

EN 300 220-1 V2.4.1:2012Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods
0 Hz ~ 6 GHz
CITC RI055 issue2:2010Specification for Radio Frequency
Identification (RFID) Equipment
0 Hz ~ 18 GHz
CITC RI082 issue2:2010Specification for Alarms0 Hz ~ 10 GHz
CITC RI102 issue2:2010Specification for GPS Receiver0 Hz ~ 18 GHz
CITC RI103 issue2:2010Specification for Bluetooth Equipment0 Hz ~ 12.75 GHz
CITC RI104 issue2:2010Specification for Zigbee Equipment0 Hz ~ 12.75 GHz
FCC Part15 Subpart C:2015Intentional Radiators0 Hz ~ 26 GHz
FCC Part15 Subpart E:2015Unlicensed National
Information Infrastructure Devices
0 Hz ~ 40 GHz
ANSI C63.10:2013American National Standard of
Procedures for Compliance Testing of
Unlicensed Wireless Devices
0 Hz ~ 40 GHz
RSS-210 issue8:2010Licence-Exempt Radio Apparatus: Category I Equipment0 Hz ~ 18 GHz
RSS-GEN issue4:2014General Requirements for Compliance of Radio Apparatus0 Hz ~ 18 GHz
RSS-216 issue2:2016Wireless Power Transfer Devices0 Hz ~ 18 GHz
RSS-247 issue1:2015Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices0 Hz ~ 40 GHz
HKTA 1035 issue6:2011Performance Specification for Radio Equipment Exempted from Licensing0 Hz ~ 18 GHz
HKTA 1039 issue4:2010Performance Specification for Radiocommunications Apparatus Operating in the 2.4 GHz or 5 GHz Band and Employing Frequency Hopping or Digital Modulation0 Hz ~ 40 GHz
HKTA 1041 issue1:2003Performance Specification for Radiocommunications Apparatus Operating in the 27 MHz Band for Private Use0 Hz ~ 1 GHz
HKTA 1044 issue1:2003Performance Specification for Radiocommunications Apparatus Operating in the 409 MHz Band as Short-Range Portable Radio0 Hz ~ 4.5 GHz
HKTA 1061 issue1:2011Performance Specification for Short Range Devices Operating in the 433 MHz Band0 Hz ~ 6 GHz
CITC RI054 issue2:2010Specification for Non-Specific Short
Range Devices and Ancillary
Equipment
0 Hz ~ 18 GHz
CITC RI050 issue2:2010Specification for Inductive Applications
and Ancillary Equipment
0 Hz ~ 5 GHz
CITC RI045 issue2:2010Specification for Wideband Data
Transmission Systems and Ancillary
Equipment
0 Hz ~ 26 GHz
EN 300 220-2 V2.4.1:2012Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Radio equipment to be used in the 25 MHz to 1 000 MHz
frequency range with power levels ranging up to 500 mW;
Part 2: Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive
0 Hz ~ 6 GHz
EN 300 330-1 V1.8.1:2015Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Radio equipment in the frequency range
9 kHz to 25 MHz and inductive loop systems
in the frequency range 9 kHz to 30 MHz;
Part 1: Technical characteristics and test methods
0 Hz ~ 1 GHz
EN 300 330-2 V1.6.1:2015Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Radio equipment in the frequency range
9 kHz to 25 MHz and inductive loop systems
in the frequency range 9 kHz to 30 MHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
0 Hz ~ 1 GHz
EN 300 440-1 V1.6.1:2010Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short range devices;
Radio equipment to be used
in the 1 GHz to 40 GHz frequency range;
Part 1: Technical characteristics and
test methods
0 Hz ~ 40 GHz
EN 300 440-2 V1.4.1:2010Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short range devices;
Radio equipment to be used
in the 1 GHz to 40 GHz frequency range;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
0 Hz ~ 40 GHz
EN 300 328 V1.9.1:2015Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Wideband transmission systems;
Data transmission equipment operating
in the 2,4 GHz ISM band and
using wide band modulation techniques;
Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
0 Hz ~ 12.75 GHz
EN 301 357-1 V1.4.1:2008Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Cordless audio devices in the range 25 MHz to 2 000 MHz;
Part 1: Technical characteristics and
test methods
Up to 10 GHz
EN 301 357-2 V1.4.1:2008Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Cordless audio devices in the range 25 MHz to 2 000 MHz;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive
0 Hz ~ 10 GHz
EN 301 893 V1.8.1:2015Broadband Radio Access Networks (BRAN);
5 GHz high performance RLAN;
Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
0 Hz ~ 26 GHz
EN 302 291-1 V1.1.1:2005Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Close Range Inductive Data Communication
equipment operating at 13,56 MHz;
Part 1: Technical characteristics and test methods
0 Hz ~ 1 GHz
EN 302 291-2 V1.1.1:2005Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Close Range Inductive Data Communication
equipment operating at 13,56 MHz;
Part 2: Harmonized EN under article 3.2
of the R&TTE Directive
0 Hz ~ 1 GHz
EN 302 502 V1.2.1:2008Broadband Radio Access Networks (BRAN);
5,8 GHz fixed broadband data transmitting systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
0 Hz ~ 26.5 GHz
EN 62311:2008Assessment of electronic and
electrical equipment related to human
exposure restrictions for electromagnetic
fields (0 Hz - 300 GHz)
IEC 62311:2007 (Modified)
0 Hz ~ 26 GHz
EN 62479:2010Assessment of the compliance of
low power electronic and electrical
equipment with the basic restrictions
related to human exposure to
electromagnetic fields (10 MHz to
300 GHz)
IEC 62479:2010 (Modified)
0 Hz ~ 26 GHz
AS/NZS 4268:2012Radio equipment and systems-Short range devices-Limits and methods of measurement0 Hz ~ 26.5 GHz
AS/NZS 4771:2000Technical characteristics and test
conditions for data transmission
equipment operating in the 900 MHz, 2.4
GHz and 5.8 GHz bands and using
spread spectrum modulation techniques
0 Hz ~ 12.75 GHz
CITC GEN001 issue2:2010General Requirements0 Hz ~ 26.5 GHz
¢º ÀüÀÚ±âÀûÇÕ¼º
KN61000-4-3:2011¹æ»ç¼º ¹«¼±Á֯ļö ÀüÀÚ±âÀå ³»¼º½ÃÇè20 MHz ~ 6 GHz
EN61000-4-3:2006/A2:2010Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio-frequency,
electromagnetic field immunity test
20 MHz ~ 6 GHz
IEC61000-4-3:2010Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test20 MHz ~ 6 GHz
KS C IEC61000-4-2:2010Àü±âÀÚ±âÀûÇÕ¼º(EMC)£­Á¦4-2ºÎ£º½ÃÇè ¹× ÃøÁ¤±â¼ú£­Á¤Àü±â ¹æÀü ³»¼º½ÃÇ衾 30 kV
KN61000-4-2:2013Á¤Àü±â¹æÀü ³»¼º½ÃÇ衾 30 kV
EN61000-4-2:2009Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test
(IEC 61000-4-2:2008)
¡¾ 30 kV
IEC61000-4-2:2008Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test¡¾ 30 kV
ISO80601-2-61:2011Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
Clauses 201.17 and 202 Electromagnetic compatibility
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
ISO80601-2-56:2009Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
Clauses 201.17 and 202 Electromagnetic compatibility
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN80601-2-35:2009/A11:2001Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use Clauses 201.17 and 202 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
KS C IEC61000-4-3:2013Àü±âÀÚ±âÀûÇÕ¼º(EMC)£­Á¦4-3ºÎ£º½ÃÇè ¹× ÃøÁ¤ ±â¼ú£­¹æ»ç ¹«¼±Á֯ļö Àü±âÀÚ±âÀå ³»¼º ½ÃÇè20 MHz ~ 6 GHz
IEC61000-4-4:2012Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test(0.2 ~ 4) kV
EN61000-4-4:2012Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test(IEC 61000-4-4:2012)(0.2 ~ 4) kV
KN61000-4-4:2011Àü±âÀû ºü¸¥ °úµµÇö»ó/¹ö½ºÆ® ³»¼º½ÃÇè(0.2 ~ 4) kV
KS C IEC61000-4-4:2013Àü±âÀÚ±âÀûÇÕ¼º(EMC)£­Á¦4-4ºÎ£º½ÃÇè ¹× ÃøÁ¤ ±â¼ú£­Àü±âÀû ºü¸¥ °úµµÇö»ó/¹ö½ºÆ® ³»¼º ½ÃÇè(0.2 ~ 4) kV
IEC61000-4-5:2005Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test(0.5 ~ 15 ) kV
EN61000-4-5:2006Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test(0.5 ~ 15 ) kV
KN61000-4-5:2008¼­Áö ³»¼º½ÃÇè(0.5 ~ 15 ) kV
KS C IEC61000-4-5:2014Àü±âÀÚ±âÀûÇÕ¼º(EMC) - Á¦4-5ºÎ: ½ÃÇè ¹× ÃøÁ¤ ±â¼ú - ¼­Áö ³»¼º½ÃÇè(0.5 ~ 15 ) kV
IEC61000-4-6:2008Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields150 kHz ~ 1 GHz
EN61000-4-6:2009Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields150 kHz ~ 1 GHz
KN61000-4-6:2013Àüµµ¼º RF ÀüÀÚ±âÀå ³»¼º½ÃÇè150 kHz ~ 1 GHz
IEC80601-2-35:2009Medical electrical equipment Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use Clauses 201.17 and 202 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC60601-2-63:2011Medical electrical equipment - Part 2-63: Particular requirements for basic safety and essential performance of dental extra-oral X-ray equipment
Clauses 201.17 and 202 Electromagnetic compatibility
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-54:2009Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
Clauses 201.17 and 202 Electromagnetic compatibility
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-25:1995+A1:1999Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs Clauses 36CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC60601-2-26:2012Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs Clauses 201.17 and 202 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-26:2003Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs Clauses 201.17 and 202 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC60601-2-27:2011Medical electrical equipment Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment Clauses 201.17 and 202 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-27:2006+AC:2006Medical electrical equipment Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment Clauses 201.17 and 202 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC60601-2-28:2010Medical electrical equipment Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis Clauses 201.17 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-28:2010Medical electrical equipment Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis Clauses 201.17 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC80601-2-30:2009Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers Clauses 201.17 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-30:2000Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers Clauses 202 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC60601-2-34:2011Medical electrical equipment Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment Clauses 201.17 and 202 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-34:2000Medical electrical equipment Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment Clauses 36 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC60601-2-37:2007Medical electrical equipment - Part 2-37: Particular requirements for the safety and essential performance of ultrasonic medical diagnostic and monitoring equipment Clauses 201.17 and 202.6 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-37:2008Medical electrical equipment - Part 2-37: Particular requirements for the safety and essential performance of ultrasonic medical diagnostic and monitoring equipment Clauses 201.17 and 202.6 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC60601-2-44:2009+AMD1:2012Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography Clauses 201.17 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-44:2009Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography Clauses 201.17 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC60601-2-45:2011Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential
performance of mammographic X-ray equipment and
mammographic stereotactic devices
Clauses 201.17 and 202 Electromagnetic compatibility
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-45:2001Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential
performance of mammographic X-ray equipment and
mammographic stereotactic devices
Clauses 201.17 and 202 Electromagnetic compatibility
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC60601-2-47:2012Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic system
Clauses 201.17 and 202 Electromagnetic compatibility
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-47:2001Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic system
Clauses 201.17 and 202 Electromagnetic compatibility
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC60601-2-49:2011Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance
of multifunction patient monitoring equipment
Clauses 201.17 and 202 Electromagnetic compatibility
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-49:2001Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance
of multifunction patient monitoring equipment
Clauses 201.17 and 202 Electromagnetic compatibility
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC60601-2-54:2009Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
Clauses 201.17 and 202 Electromagnetic compatibility
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
KS C IEC61000-4-6:2010Àü±âÀÚ±âÀûÇÕ¼º(EMC)£­Á¦4-6ºÎ£º½ÃÇè ¹× ÃøÁ¤ ±â¼ú£­Àü±âÀÚ±âÀå Àüµµ ³»¼º ½ÃÇè150 kHz ~ 1 GHz
IEC61000-4-8:2009Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test300 A / Continous
1200 A / Short
IEC61326-1:2012Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirementsCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN61326-1:2013Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirementsCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC61326-2-1:2012Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applicationsCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN61326-2-1:2013Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applicationsCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC61326-2-2:2012Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systemsCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN61326-2-2:2013Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systemsCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC61326-2-3:2012Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioningCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN61326-2-3:2013Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioningCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC61326-2-4:2012Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN61326-2-4:2013Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC61326-2-5:2012Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN61326-2-5:2013Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC61326-2-6:2012Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipmentCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 3 V/m
EFT : ¡¾ 1 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 3 A/m
V-dip : (0 ~ 100 ) %
EN61326-2-6:2013Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. In vitro diagnostic (IVD) medical equipmentCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 3 V/m
EFT : ¡¾ 1 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 3 A/m
V-dip : (0 ~ 100 ) %
IEC61547:2009+IS1:2013Equipment for general lighting purposes - EMC immunity requirementsESD : ¡¾ 8 kV
RS : 80 MHz ~ 1 GHz, 3 V/m
EFT : ¡¾ 1 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 3 A/m
V-dip : (0 ~ 100 ) %
EN61547:2009Equipment for general lighting purposes. EMC immunity requirementsESD : ¡¾ 8 kV
RS : 80 MHz ~ 1 GHz, 3 V/m
EFT : ¡¾ 1 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 3 A/m
V-dip : (0 ~ 100 ) %
KN61547:2012Á¶¸í±â±â ³»¼º±âÁØ ¹× ½ÃÇè¹æ¹ýESD : ¡¾ 8 kV
RS : 80 MHz ~ 1 GHz, 3 V/m
EFT : ¡¾ 1 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 3 A/m
V-dip : (0 ~ 100 ) %
KS C IEC61547:2014ÀÏ¹Ý Á¶¸í±â±â ¦¡ Àü±âÀÚ±âÀûÇÕ¼º ³»¼º ¿ä±¸»çÇ×ESD : ¡¾ 8 kV
RS : 80 MHz ~ 1 GHz, 3 V/m
EFT : ¡¾ 1 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MF : 3 A/m
V-dip : (0 ~ 100 ) %
IEC62040-2:2005Uninterruptible power systems(UPS)
Part2: Electromagnetic compatibility (EMC)
requirements
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 1 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-dip : (0 ~ 100 ) %
Harmonic : ¡Â16 A (1¥Õ)
Flicker ¡Â16 A (1¥Õ)
EN62040-2:2006+AC: 2006Uninterruptible power systems(UPS)
Part2: Electromagnetic compatibility (EMC)
requirements
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 1 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-dip : (0 ~ 100 ) %
Harmonic : ¡Â16 A (1¥Õ)
Flicker ¡Â16 A (1¥Õ)
ETSI EN 300386 V1.6.1Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Telecommunication network equipment:
ElectroMagnetic Compatibility (EMC) requirements
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ¡¾ 1 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-dip : (0 ~ 100 ) %
ETSI EN301489-1 V1.9.2Electromagnetic compatibility
and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility(EMC)
standard for radio equipment and services;
Part 1: Common technical requirements

9.6 Transient and surges in the vehicular environment
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.7 GHz, 3 V/m
EFT : ¡¾ 1 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-dip : (0 ~ 100 ) %
Harmonic : ¡Â16 A (1¥Õ)
Flicker ¡Â16 A (1¥Õ)
KS C IEC62236-5:2011öµµ¿ë Àü±â ÀÚ±â ÀûÇÕ¼º£­Á¦5ºÎ£º°íÁ¤ Àü·Â °ø±Þ ¼³ºñ¿Í ÀåÄ¡ÀÇ ¹æÃâ ¹× ³»¼º
<Á¦¿ÜÇ׸ñ>
Ç¥3. °¨¼è ¹ßÁø Àü¾Ð
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.5 GHz, 20 V/m
EFT : ¡¾ 4 kV
Surge : ¡¾ 4 kV
CS : 150 kHz ~ 230 MHz, 10 V
MF : 300 A/m
IEC62236-5:2008Railway Application - Electromagnetic Compatibility Fixed power supply installations

Table3. Damped Oscillatory Voltage
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.5 GHz, 20 V/m
EFT : ¡¾ 4 kV
Surge : ¡¾ 4 kV
CS : 150 kHz ~ 230 MHz, 10 V
MF : 300 A/m
KS C IEC62236-4:2011öµµ¿ë Àü±â ÀÚ±â ÀûÇÕ¼º£­Á¦4ºÎ£º½ÅÈ£ ó¸® ¹× Åë½Å ÀåÄ¡ÀÇ ¹æÃâ ¹× ³»¼ºCE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.5 GHz, 20 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 230 MHz, 10 V
MF : 300 A/m
Pulse Magnetic : 300 A/m
EN61000-4-8:2010Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test300 A / Continous
1200 A / Short
KN61000-4-8:2013Àü¿ø Á֯ļö ÀÚ±âÀå ³»¼º½ÃÇè300 A / Continous
1200 A / Short
KS C IEC61000-4-8:2010Àü±âÀÚ±âÀûÇÕ¼º(EMC)£­Á¦4-8ºÎ£º½ÃÇè ¹× ÃøÁ¤±â¼ú£­Àü¿øÁ֯ļö ÀÚ°è ³»¼º ½ÃÇè300 A / Continous
1200 A / Short
IEC61000-4-9:2009Testing and measurement techniques-Pulse
magnetic field immunity test
(100 ~ 1000) A/m (Peak)
EN61000-4-9:1993+A1:2001Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test
(100 ~ 1000) A/m (Peak)
KN61000-4-9:2013ÆÞ½ºÀÚ±âÀå ³»¼º ½ÃÇè¹æ¹ý(100 ~ 1000) A/m (Peak)
KS C IEC61000-4-9:2003Àü±â ÀÚ±â ÀûÇÕ¼º(EMC)£­Á¦4ºÎ£º½ÃÇè ¹× ÃøÁ¤ ±â¼ú£­Á¦9Àý£ºÆÞ½º ÀÚ°è ³»¼º ½ÃÇ裭EMC ±âº» ±Ô°Ý(100 ~ 1000) A/m (Peak)
IEC61000-4-11:2004Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests¡Â 16 A
EN61000-4-11:2004Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests¡Â 16 A
KN61000-4-11:2008Àü¾Ð °­ÇÏ ¹× ¼ø°£ Á¤Àü ³»¼º½ÃÇè¡Â 16 A
KS C IEC61000-4-11:2008Àü±âÀÚ±âÀûÇÕ¼º(EMC)£­Á¦4-11ºÎ£º½ÃÇè ¹× ÃøÁ¤ ±â¼ú£­Àü¾Ð °­ÇÏ, ¼ø½Ã Á¤Àü ¹× Àü¾Ð º¯µ¿ ³»¼º ½ÃÇè¡Â 16 A
IEC61204-3:2000Low voltage power supplies, d.c.output - Part 3: Electromagnetic compatibility (EMC)CE : 0.15 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 1 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 1 V
V-dip : (0 ~ 100 ) %
EN61204-3:2000Low voltage power supplies, d.c. output. Electromagnetic compatibility (EMC)CE : 0.15 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 1 GHz, 10 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 1 V
V-dip : (0 ~ 100 ) %
IEC62236-1:2008Railway Application - Electromagnetic Compatibility - Part 1: General
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 3 GHz
EFT : ¡¾ 4 kV
Surge : ¡¾ 4 kV
CS : 150 kHz ~ 230 MHz
MF : 30 A/m
V-dip : (0 ~ 100 ) %
KS C IEC62236-1:2006öµµ¿ë Àü±â ÀÚ±â ÀûÇÕ¼º£­Á¦1ºÎ£ºÀÏ¹Ý »çÇ×ESD : ¡¾ 8 kV
RS : 80 MHz ~ 3 GHz
EFT : ¡¾ 4 kV
Surge : ¡¾ 4 kV
CS : 150 kHz ~ 230 MHz
MF : 30 A/m
V-dip : (0 ~ 100 ) %
IEC62236-2:2008Railway Application - Electromagnetic Compatibility - Part 2: Emission of the whole railway system to the outside world
RE : 9 kHz ~ 1 GHz
KS C IEC62236-2:2006öµµ¿ë Àü±â ÀÚ±â ÀûÇÕ¼º£­Á¦2ºÎ£ºÀüü öµµ ½Ã½ºÅÛ¿¡¼­ ¿ÜºÎ·Î ³ª°¡´Â ¹æÃâRE : 9 kHz ~ 1 GHz
IEC62236-3-1:2008Rolling Stock
Train and complete vehicle
RE : 9 kHz ~ 1 GHz
KS C IEC62236-3-1:2006öµµ¿ë Àü±â ÀÚ±â ÀûÇÕ¼º£­Á¦3£­1ºÎ£ºÃ¶µµ Â÷·®£­¿­Â÷ ¹× °øÂ÷RE : 9 kHz ~ 1 GHz
IEC62236-3-2:2008Railway Application - Electromagnetic Compatibility - Part 3 - 2 Rolling Stock _ Apparatus
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.5 GHz, 20 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 230 MHz, 10 V
KS C IEC62236-3-2:2011öµµ¿ë Àü±â ÀÚ±â ÀûÇÕ¼º£­Á¦3£­2ºÎ£ºÃ¶µµ Â÷·®£­ÀåÄ¡CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.5 GHz, 20 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 230 MHz, 10 V
IEC62236-4:2008Emission and immunity of the signalling and telecommunications apparatus
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 2.5 GHz, 20 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 230 MHz, 10 V
MF : 300 A/m
Pulse Magnetic : 300 A/m
IEC60601-2-25:2011Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs Clauses 201.17 and 202 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
EN60601-2-18:1996+A1:2000Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment Clauses 201.17 and 202 Electromagnetic compatibilityCE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ¡¾ 15 kV
RS : 80 MHz ~ 5.8 GHz, 28 V/m
EFT : ¡¾ 2 kV
Surge : ¡¾ 2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MF : 30 A/m
V-dip : (0 ~ 100 ) %
KN16-2-2:2011ÀüÀÚÆÄÀåÇØ ¹× ³»¼º ÃøÁ¤±â±â¿Í ¹æ¹ý¿¡ ´ëÇÑ ±ÔÁ¤ – ÀåÇØÀü·ÂÀÇ ÃøÁ¤30 MHz ~ 300 MHz
KS C CISPR16-2-2:2012ÀüÆÄ ¹æÇØ ¹× ³»¼º ÃøÁ¤Àåºñ¿Í ÃøÁ¤¹æ¹ý¿¡ ´ëÇÑ ±ÔÁ¤£­Á¦2-2ºÎ£º¹æÇØ ¹× ³»¼º ÃøÁ¤¹æ¹ý£­¹æÇØ Àü·Â30 MHz ~ 300 MHz
KN16-2-3:2011ÀüÀÚÆÄÀåÇØ ¹× ³»¼º ÃøÁ¤±â±â¿Í ¹æ¹ý¿¡ ´ëÇÑ ±ÔÁ¤ – ¹æ»ç¼º ÀåÇØÃøÁ¤RE: 9 kHz ~ 18 GHz
KS C CISPR16-2-3:2012ÀüÆÄ ¹æÇØ ¹× ³»¼º ÃøÁ¤Àåºñ¿Í ÃøÁ¤¹æ¹ý¿¡ ´ëÇÑ ±ÔÁ¤£­Á¦2-3ºÎ£º¹æÇØ ¹× ³»¼º ÃøÁ¤¹æ¹ý£­º¹»ç¼º ¹æÇØ ÃøÁ¤RE : 9 kHz ~ 18 GHz
KN16-2-4:2008³»¼º ÃøÁ¤ RS : 80 MHz ~ 3 GHz
CS : 150 kHz ~ 230 MHz
KS C CISPR16-2-4:2012ÀüÆÄ ¹æÇØ ¹× ³»¼º ÃøÁ¤Àåºñ¿Í ÃøÁ¤¹æ¹ý¿¡ ´ëÇÑ ±ÔÁ¤£­Á¦2-4ºÎ£º¹æÇØ ¹× ³»¼º ÃøÁ¤¹æ¹ý£­³»¼º ÃøÁ¤RS : 80 MHz ~ 3 GHz
CS : 150 kHz ~ 230 MHz
CISPR22:2008Information technology equipment - Radio disturbance characteristics - Limits and methods of measurementCE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
EN55022:2010+AC:2011Information technology equipment –Radio disturbance characteristics –
Limits and methods of measurement (CISPR 22:2008)
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
AS/NZSCISPR22:2009+A1:2010Information technology equipment - Radio disturbance characteristics - Limits and methods of measurementCE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
J 55022(H22)Information technology equipment - Radio disturbance characteristics - Limits and methods of measurementCE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
GB9254:2008Information technology equipment
-Radio disturbance characteristics
-Limits and methods of measurement
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
KN22:2009Á¤º¸±â±â ·ùÀÇ ÀüÀÚÆÄ ÀåÇØ ¹æÁö ½ÃÇè ¹æ¹ýCE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
KS C CISPR22:2011Á¤º¸±â±âÀÇ ¹«¼±¹æÇØ Æ¯¼º¿¡ ´ëÇÑ ÃøÁ¤¹æ¹ý ¹× ÇѰ谪CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
CISPR24:2010Information technology equipment - Immunity characteristics - Limits and methods of measurementESD : ¡¾ 8 kV
RS : 80 MHz ~ 1 GHz 3 V/m
EFT : ¡¾ 1 kV
Surge : ¡¾ 4 kV
CS : 150 kHz ~ 80 MHz 3 V
MF : 1 A/m
V-dip : (0 ~ 100 ) %
EN55024:2010Information technology equipment –Immunity characteristics –
Limits and methods of measurement
ESD : ¡¾ 8 kV
RS : 80 MHz ~ 1 GHz 3 V/m
EFT : ¡¾ 1 kV
Surge : ¡¾ 4 kV
CS : 150 kHz ~ 80 MHz 3 V
MF : 1 A/m
V-dip : (0 ~ 100 ) %
KN24:2011Á¤º¸±â±â ³»¼º ½ÃÇè ¹æ¹ýESD : ¡¾ 8 kV
R
¸ñ·Ï